So that it never gets cold in your sauna, we offer you a wide range of suitable initial heating rods for your sauna heater

We recommend replacing all heating elements. You never know when the next heating element will break and then you have to do all the work again.

Each heater is tested by the manufacturer before leaving the factory. We receive a protocol of the test with the technical data.

If the RCD switch or fuse blows, it is usually due to one or more defective heating elements. The electrician can then measure the heating elements and isolate the fault.

Important information on this can be found on the heater's type plate. This nameplate is located either on the side, back or underside of the heater. It is engraved with the heater's article number, voltage and total wattage.

During a sauna infusion, a small amount of cold or warm water is applied to the hot stones of the stove using a trowel. The water evaporates and increases the humidity.

Heating rod sauna heater - Replace spare heating rod

A luxury that not only the upper ten thousand can afford is the home sauna. After a long working day, for many people there is nothing better than sweating away the stress of the day. That's why the first course in the evening leads to the Sauna cabin to get a new sauna heater rod, Electric sauna heater and co. to get going. After all, the sauna cabin needs a little time to reach a comfortable temperature. Soon the sauna owner can then let his soul dangle and give free rein to his desire for wellness. However, so that not only the family but also friends and acquaintances can often have fun in the sauna together, the sauna owner must be able to rely on his sauna oven as a sauna accessory and the spare heating rod, also called tubular heater. The queue of sauna-goers who announce their visit every day becomes a burden for the sensitive sauna over time. The first signs of aging are then of course the heating coil, heating rod and sauna oven. In many cases, the FI of the sauna heater will fly out after some time if a heating rod is defective.


Such a spare heating rod for the sauna must perform a lot

At the latest when you have to serve your guests several cocktails before the actual sauna enjoyment in order to bridge the increasingly long heating-up period, the sauna owner should think about a general overhaul of the sauna. Clever sauna owners of course always have a spare heating rod in the drawer to be prepared for emergencies. But it is not always enough to replace the heating coil or heating rod. Being a sauna heater is a hard job and sometimes more sauna accessories than just a Der Saunaheizstab sorgt für die Wärme in der Saunakabinereplacement heating rod have to be replaced to get it back to working order. A prudent sauna owner naturally has a watchful eye on the Sauna accessories. This is why the sauna heater always shines in a healthy glow. However, hardly anyone looks behind the facade. Suddenly the sauna heater loses its youthful power and groans in agony as it tries to bring the sauna cabin to the desired sauna climate despite everything. To do this, however, the sauna heating rod, sauna oven and sauna accessories must work hand in hand. If one of them falls out of line, the sauna is robbed of its life. Because a cold sauna has little use for the sauna-goer.

Even a sauna heating rod in the sauna oven can break down

Now many sauna owners think that sauna heating rods cannot break because they have paid attention to the best quality when buying them. However, even the best sauna heaters will eventually run out of preserves. The ravages of time gnaw at every sauna accessory. When the sauna no longer gets hot, you have to act quickly and get to the bottom of the problem. Otherwise the regular wellness pleasure suffers and the sauna owner has to disappoint his family, friends and acquaintances. As a rule, it is sufficient to replace the heater rod of the sauna heater with a replacement heater rod in order to breathe new life and above all work courage into the sauna heater. So there is no reason to send the companions from long sauna times into retirement. However, it can be difficult to find the right replacement heating rod, because not every sauna heater accepts some new partner under its hood. Maybe he is more interested in a heating coil or the replacement heating rod does not meet his requirements, in which case the heater will go on strike instead of working properly again.


Which sauna heating rod - tubular heater for my sauna oven is the right one?

The fathers of the sauna heater and sauna accessories manufacturers have in fact developed individual heating coils and heating rods for each of their children. These only fit their own children and are not compatible with other sauna heaters. Therefore, the sauna owner must find out exactly which heating rod is the right one for his or her heater. To do this, the nominal output of the heating elements must be precisely matched to the overall output of the heater. The sauna owner must therefore first take a look at the discarded heating rod. There is an engraving on it, on which the exact designation of the model is written. Once the new heating coil or replacement heating rod has been installed, the sauna can resume full operation. This will certainly be a day of rejoicing for the whole family, friends and acquaintances.

The sauna owner will also be pleased with the new sauna heating rods. After all, they provide enormous energy and cost savings. A defective sauna heating rod that works on the last hole needs a lot more energy than an intact one to generate any heat at all. By overhauling the heating rods, the sauna owner also saves his wallet, an aspect that is particularly important in today's world. Also with regard to the healthy environment, which is not only important for the sauna, but also for the well-being of the sauna-goer.
Beim Tausch des Heizstabs sollten auch die Saunasteine gewechselt werdenTo prevent sauna lovers from having to do without their beloved sauna sessions for a few days, regular maintenance of the sauna heating rod, sauna oven, heating coil, replacement heating rod and sauna accessories is essential. In this way, the sauna owner recognizes early on which parts are approaching their natural death and can replace them before day X has come. This simple measure keeps failures within limits and disappointments are avoided. So happy people can continue to increase their well-being in the sauna every day anew. Your sauna does not get warm properly or not at all? Often the fault lies here in a defective heating element. However, before ordering a new heating rod and instructing the electrician to replace the heating element in the sauna heater, it is worth looking at other details.

If the sauna heater fails, in many cases this is due to a blown fuse or the RCD switch. Therefore, first check the fuses for the sauna heater and the RCD switch in the electrical system. If no cause can be identified here, the next look is at the heating element in the sauna heater itself. To do this, with the sauna oven switched off, first remove the Sauna stones remove the housing and get a clear view of the heating element. First check it for visible damage. If such damage is visible, the heating element must be replaced anyway.

The replacement of the heating element in the sauna oven should always be carried out by qualified personnel. To order this service, please refer to the type plate on the back of the sauna heater. With this information, the specialist knows which type of sauna heater is involved and which heating element must be re-ordered.

The heating element can then be changed relatively quickly. To do this, the specialist will loosen the plug connections on the heating element, remove it and measure it briefly. If the fault really lies in the heating rod, it will be replaced quickly and easily, so that you can use your sauna again soon.

Newsletter registration

News, discounts, tips & tricks on the subject of saunas. Let our newsletter inform you free of charge.

Nach oben